Attaining a flawless and professional look [in any room] is only achievable with a perfectly smooth wall surface. Wall putty is an important part of preparing your walls whether you’re painting a new wall or refreshing an old one. It helps level out the surface, fill up minor imperfections, and strengthen the final paint finish. If you want to get a smooth wall surface using wall putty, here’s a detailed guide to fulfil your requirements.
- Understanding The Fundamentals of Wall Putty
Wall putty is a versatile material that is used to prepare walls for painting. It originates from white cement, polymers, and minerals, allowing users to attain a smooth and uniform surface. There are two main types of wall putty, namely Acrylic and White Cement-based. Acrylic putty is best used for interiors because of its ease of use and smooth finish.
Whereas, cement-based putty is ideal for both interior and exterior applications due to its durability attributes. The type of putty you choose depends on the condition of your wall and your particular needs. Cement putty is suitable for exterior walls or areas exposed to moisture, and acrylic putty is ideal for decorative finishes in interiors.
- Preparing the Wall Surface
Successful wall putty application depends on the preparation process. Begin by cleaning the wall to remove dust, grease, and loose particles. If you have older walls, scrape off flaking paint or plaster so that the surface is even.
If the surface has cracks, holes, or major imperfections, fill with a cement-based filler before applying putty. When the wall is clean and repaired, dampen it lightly with water. This helps the putty stick better as it won’t dry too fast upon application.
- Mixing And Applying Wall Putty
Cement-based putty should be mixed with water to get the right consistency. In a clean container, add putty to water gradually and mix thoroughly until you have a smooth, lump-free paste. The mixture must sit for a few minutes before applying. Acrylic putty is ready to use and doesn’t need mixing. It can be applied directly.
For best results, apply the putty in two coats. Spread a thin, even layer using a steel putty knife or trowel on the wall. Work downward from the top, keeping the application consistent. Allow the first coat to dry for at least six to eight hours. Once it dries, sand the surface lightly to remove roughness. Next, apply the second coat, and allow it to dry completely for 24 hours.
- Finishing and Priming
After the putty has dried, use fine grit sandpaper to even the surface and remove any remaining imperfections. Sanding ensures the wall is perfectly even and ready to be painted. Once you’ve sanded, clean the wall with a dry cloth to remove any dust.
The next crucial step is to apply a primer. Paint primer helps the paint stick better and makes the topcoat last longer. Select a primer that is right for your wall type, and once dry, paint it. This step also seals the putty, protects it from moisture, and helps keep the paint vibrant and long-lasting.
- Achieving the Perfect Finish
Wall putty should be used correctly to make your walls a perfect canvas for painting. Success depends on proper preparation, careful application, and attention to detail. The application of wall putty [when done right] can enhance the appearance of your walls and also extend their life by protecting them from cracks, moisture, and flaking.
Final Overview
If you’re remodelling your home or starting a new project, learning how to apply wall putty will make your walls look better and last longer. Be sure to seek assistance from expert professionals to learn more about this topic.
Comments are closed.